5W 10W 15W Lube Oil Blending Machine With Additive Weighing System

5W 10W 15W Lube Oil Blending Machine With Additive Weighing System

The principle of lubricating oil blending is as follows:

1. The base oil, various additives, anti-oxidation, anti foaming, anti-wear agent and tackifier of lubricating oil shall be prepared according to the formula of lubricating oil. Fully mix, and then sample according to the product standard. After the analysis and inspection are qualified, the blending is successful.

2. Lubricating oil is generally composed of base oil and additives. Base oil is the main component of lubricating oil, which determines the basic properties of lubricating oil. Additives can make up for and improve the performance of base oil, give some new properties, and are an important part of lubricating oil.

3. The base oil and additives are added into the mixing tank according to the production process formula, heated and stirred, so that the components are fully mixed, and the temperature is moderate and under PurePath PLC automatic control. Generally, the maximum use temperature of the additives is not more than 70 ° C, or the oil with high temperature is easy to oxidize. After mixing, samples are taken to test the indicators, especially the viscosity, and can be filled after passing the test.

About Lube oil blending

Blending is the last important process in the process of lubricating oil Production. According to the formula of the oil, the components of lubricating oil base oil and additives are added into the blending kettle in proportion and order. The blending is uniform by mechanical mixing, pump circulation mixing, pulse mixing and other methods. After that, the formal product is obtained after sampling and analysis according to the product standard. The factors that affect the blending quality of lubricating oil include the accurate measurement of components, the water content in components, the air in components, the temperature of blending components and the dilution of additives. Among them, the pump circulation mixing is to continuously pump the materials in the tank from the bottom of the tank and then return to the mixing tank. Under the action of the pump, the main body convection diffusion and vortex diffusion are formed, so that the oil products are mixed evenly. From the actual situation, it can be seen that the pump circulation mixing has relatively low mixing efficiency and high energy consumption.

Product to be made from PPGT lube oil blending system: automotive lubricants and industrial lubricants.

Raw materials needed:

*Lube Base Stock
*Additives

LUBE BASE STOCK: One of the products is base stock, which processed further, provides us with base oil. Base oil is the lubricant that is used to lubricate machines.

This base oil needs to have certain chemicals called additives added to it to enhance its Performance as a good lubricating agent. These additives together perform diverse functions but each additive has a specific use and together they give the lubricant its character. Depending on the engine the lubricants is to be used; the ratio of base oil to additives varies from 85:15 to 90:10.

TYPES OF BASE OILS COULD BE AS THE RAW MATERIALS

Group 1, Group 2, Group 3
GTL
SN500, SN 150, SN 70
BS

Typical Lubricant Blending by PPGT Oil Blending Machine With Automatic Control System

Company

Factory Show


Customer Visiting