Full Set Of Engineering Drawing Provided Pyrolysis Oil To Diesel Recycling Plant With CE
Product Description of Provide full set of engineering drawing oil recycling plant
We are proud to present you with our PPGT-LP waste oil cracking distillation plant which is combined with dozens of our newest technologies to delivery you with the excellent quality of diesel oil out of different type of car engine and machinery engine or industrial waste oil, tire and plastic pyrolysis oil and sludge oils.
As the manufacturer, PurePath owns professional engineering team to provide constructively project proposal according to different waste oil feedstock or standard requirement of the final oil products. In order to get a more clear and purier distillates, genuine continuous fractional distillation and further PurePath exclusive desulfurization system are optional. Before the process of distillation begins, we also highlight the equally important steps prior to cracking distillation. A concurrent pretreatment solid removal and dehydration and defueling process could also upgrade the quality and purity of oil products and increase the working efficiency.
Technical Process Description of Provide full set of engineering drawing oil recycling plant
Plant Specification Of Provide full set of engineering drawing oil recycling plant
| Model No. | PPGT-LP-1 | PPGT-LP-2 | PPGT-LP-3 | PPGT-LP-4 | PPGT-LP-5 | PPGT-LP-6 | PPGT-LP-7 | PPGT-LP-8 |
| Items. | ||||||||
| Process Capacity MAX. | 2 TPD | 5 TPD | 10 TPD | 15 TPD | 20 TPD | 30 TPD | 50 TPD | 100 TPD |
| Heating Power | 17KGS LPG/20KGS FUEL OIL/230KWH/PER TON OF WASTE OIL | |||||||
| Power Consumption | 25KWH PER TONS OF WASTE OIL | |||||||
| Working Pressure | Atoms pressure | |||||||
| Heating Method | Fuel Oil/Natural Gas/LPG/Electricity | |||||||
| Heating Temp. | 30-420℃ | |||||||
| Voltage | 220/380/415V 50/60HZ | |||||||
| Noise | ≤60dB | |||||||
Performances of recycled diesel from Provide full set of engineering drawing oil recycling plant
Parameters Of Diesel Product From Provide full set of engineering drawing oil recycling plant
| PARAMETER | UNIT | METHOD | RESULT | ||||
| Flash Point PMCC | °C | ASTM D93-18a | 61 °C | ||||
| Water Content | ppm | ASTM D 6304-07 | 81 | ||||
| Lubricity, corrected diameter (ws 1.4) at 60°C § | µm | ASTM D6079-18 | 485 | ||||
| Ash Content | % wt | ASTM D 482-13 | <0.001 | ||||
| Sulphur Content | %wt | ASTM D4294-16e1 | 0.0046 | ||||
| Density at 15°C | kg/m3 | ASTM D1298-12b | 835.5 | ||||
| Pour Point | °C | ASTM D97-12 | -21 | ||||
| Cetane Index | ASTM D 4737-10 | 55.8 | |||||
| Viscosity Kin at 40°C | cSt | ASTM D445-17a | 3.8 |
High Lights Of Provide full set of engineering drawing oil recycling plant
•ECO Friendly: full set of tail gas processing line with scrubber and ultraviolet deodor system.
• Genuine continuous distillation: Equipped with unique fractionator for continuous process.
•Optional heating method to prevent fouling and higher heat efficiency.
•First-calss raw materials with ASME relations standard
•Thickness and material selection are after calculation by profession engineering software.
•Cooling and heat exchange area are after precising calculation by Apsen and ProII.
•Special waste oil from customer are doing pre-test and all properties are tested to give report in PurePath's professional laboratory.
Factory Show
Customer Visiting
Successful Project Show
Please do not hesitate to contact me.
