Produce Water Color Diesel Full Automatic Control Wast Oil To Diesel Plant
Product Description of Automatic Control Wast Oil To Diesel Plant
PPGT oil extraction and desulfurization plant is carried out to efficiently remove poly aromatic hydrocarbons, sulfur-containing compounds, colloids and asphaltenes for diesel from cracking distillation streams or pyrolysis. It adopts PurePath exclusive technology combining with ultrosound and hydrocavitation to enhance the desulfurization oxidation reaction. It's 10-20 times desulfurization ability than ordinary silica gel refining or desulfurization catalyst. It could produce water color diesel from dark or red diesel, meanwhile the desulfurization diesel is with optimal oxidation stability which could even store 6 months without color change.
Performances of Polished oil from Automatic Control Wast Oil To Diesel Plant
Ref. Diesel Properties from Automatic Control Wast Oil To Diesel Plant
PARAMETER | UNIT | METHOD | RESULT | TYPICAL |
Flash Point PMCC | °C | ASTM D93-18a | 61 °C | Min. 52 |
Water Content | ppm | ASTM D 6304-07 | 81 | Max. 500 |
Lubricity, corrected diameter (ws 1.4) at 60°C § | µm | ASTM D6079-18 | 485 | Max. 520 |
Ash Content | % wt | ASTM D 482-13 | <0.001 | Max. 0.01 |
Sulphur Content | %wt | ASTM D4294-16e1 | 0.0046 | Max. 0.25 |
Density at 15°C | kg/m3 | ASTM D1298-12b | 835.5 | 815 - 870 |
Pour Point | °C | ASTM D97-12 | -24 | Max. 18 |
Copper Strip corrosion (3h / 50°C {122°F}) | ASTM D 130-12 | 1.a | Max. Class 1 | |
Cetane Index | ASTM D 4737-10 | 56 | Min. 45 | |
Distillation Recovery Basis : | °C | ASTM D 86-17 | ||
10 % Vol. | °C | ASTM D 86-17 | 205.8 °C | |
50 % Vol. | °C | ASTM D 86-17 | 286.0 °C | |
90 % Vol. | °C | ASTM D 86-17 | 351.9 °C | |
Conradson Carbon Residue On 10% Distillate Residue | % wt | ASTM D 189-06 | 0.001 | Max. 0.1 |
Viscosity Kin at 40°C | cSt | ASTM D445-17a | 3.8 | 2.0 - 4.5 |
Features of PurePath Automatic Control Wast Oil To Diesel Plant
PPGT UODS as an alternative Hydrogenation Treatment fuel oil desulfurization process offers significant advantages. Thiophene, substituted benzo- and dibenzothiophene are oxidized at low temperature and low pressure. Therefore, expensive hydrogen is not required, making the process more suitable for small and medium-sized Refineries or isolated refineries not close to hydrogen pipelines. The increased reaction rate and mild reaction temperature and pressure avoid the use of expensive anhydrous or aprotic solvents. Ultrasonic assisted oxidative desulfurization (UAODS) unit can produce low sulfur and / or ultra-low sulfur diesel. This technology can be used to reduce sulfur content before or after FFC fuel oil or atmos distillation diesel and pyrolysis oil. Compared with the new high-pressure hydrotreating unit, the UAODS process can reduce the estimated capital cost by more than half and get the same result for end product.
Company Profile
PurePath Green Tech Co., Ltd., a matured and professional manufacturer in waste oil re-refining and distillation territory with over 10 years of experience, which is specialized in the following cutting edge technologies:
PurePath has successfully developed continuous distillation system, film evaporation system, light hydrocarbon continuous stripping system, wiped film and short-parth distillation system, solvent extraction system and ultrasonic desulfurization system etc.. Our mission is to facilitate environmental restoration, resource recovery and pollution reduction through innovative technologies and design, construction, and operation of affordable state-of-the-art waste recovery systems.
Factory Show
Customer Visiting
Successful Project Show
FAQ
1, What's the main purpose of PPGT-SDS?
It's mainly used to deep desulfurization for kinds of bad quality diesel from cracking distillation, pyrolysis plant or red and dark color diesel from oxidization.
2, Is there any contaminants generated from PPGT-SDS?
No, as a upgrade alternative of silica gel or clay refining, PPGT-SDS is no waste generated during refining process. It's completely pollution-free and the refined diesel will be with good properties like hydrotreated petroleum products.
3, How much oil we can get after PPGT-SDS deep desulfurization process?
We can get more than 99% polished oil from PPGT-SDS; The oil loss is only 0.5%-1%.
Based on project management, equipment design, procurement and rich modular manufacturing, testing, commissioning and after-sales service experience in oil processing, PurePath Green Technology Co., Ltd. is committed to providing customers with complete and efficient modular solutions to meet customer needs.
Welcome to contact us for more details (+86 15213363289 WhatsApp / WeChat 24-H service)