PurePath Factory Directly Provide Base Oil Desulfurization Extraction Plants With CE

PurePath Factory Directly Provide Base Oil Desulfurization Extraction Plants With CE

Features and Advantages of PurePath Base Oil Desulfurization Extraction Plants

1. Separation of Oil phase and solvent mixture with high efficiency and large treatment capacity- Maximum 2000ML/min;
2. As the improvement alternative of expensive transfer storage tanks and pumps to save cost and land occupation;
3. Two inputs of light and heavy phases Suitable for proportion, flow adjustment - Easy control the flow of oil and solvent mixing dose;
4. Adjustable weir plate size and speed - suitable for different viscosity of base oil refining;
5. Full set of explosion-proof and materials suitable for toxic and harmful media;
6. Operation in a closed system, have no pollution for environment.

 
Performances of Polished oil from Base Oil Desulfurization Extraction Plants
 

 
 
Technical Flow Chart of Base Oil Desulfurization Extraction Plants
 

1. Multiple stages centrifuge solvent extractor finishing times liquid-liquid extraction and separation with input base oil. Capture and separate the the aromatics and undesirable components.
2. Used solvent will be sent to fractional distillation tower for recycling. Recovery rate is as higher as 99.9%.
3. Extracted base oil makes its way to residual solvent stripping tower for further polishing.
4. Gas generated during whole process will be collected and discharge after gas purification system.

 
Efficient Centrifugal Extractor of Base Oil Desulfurization Extraction Plants

The principle of high-speed centrifugal contactor is: two immiscible solutions with different densities are pumped into the extractor through two inlets respectively, and then quickly mixed in the gap between the cylinder and the shell. The mixed liquid enters the cylinder through the inlet at the bottom of the cylinder, accelerating the heavy phase to be thrown to the side of the drum. The light phase is located inside the heavy phase, the two-phase interface is located between the light phase outlet and the heavy phase underflow channel, and the heavy phase underflow channel is located in the upper part of the separation zone composed of heavy phase enthalpy.

 
 
Factory Show

 
 
Customer Visiting

 
Successful Project Show
 

 

FAQ

1, How much oil we can get after PPGT-SE solvent extraction plant?

We can get 98%-99% polished oil from PPGT-SE; The oil loss is only 0.5%-1%.

2, What the difference between our solvent refining plant and other company`s refining plant?

Competitors adopts clay refining, acid treatment, to use solvent extraction towers or blending tank instead. It's with high chemcial consumbles and will generate secondary pollutes bad for environment. Compared with blending tank and solvent tower, PurePath adotps centrifuge extraction refining plant which is with higher efficnent, zero emissions and without secondary pollutes.

Based on project management, equipment design, procurement and rich modular manufacturing, testing, commissioning and after-sales service experience in oil processing, Chongqing PurePath Green Tech. Co., Ltd. is committed to providing customers with complete and efficient modular solutions to meet customer needs.

Welcome to contact us for more details (+86 15213363289 WhatsApp / WeChat 24-H service)