Waste Pyrolysis Oil Engine Oil Recycling To Diesel Lube Oil Recycling Plant
Product Description of To Diesel Lube Oil Recycling Plant
We are so proud to present you with our PPGT-LP series oil distillation plants. It could produce excellent quality of diesel from different type of waste oil and pyrolysis oils. It combines with dozens of our newest technologies, unique engineering designs for LGO stripper, fractionator, selected cracking catalyst and a little bit assistance of PurePath exclusive desulfuring plant, It produces top quality of even Euro5 commerical diesel fuel with water color. For more information, please feel free to contact us.
Plant Specification of To Diesel Lube Oil Recycling Plant
| Model No. | PPGT-LP-1 | PPGT-LP-2 | PPGT-LP-3 | PPGT-LP-4 | PPGT-LP-5 | PPGT-LP-6 | PPGT-LP-7 | PPGT-LP-8 |
| Items. | ||||||||
| Process Capacity MAX. | 2 TPD | 5 TPD | 10 TPD | 15 TPD | 20 TPD | 30 TPD | 50 TPD | 100 TPD |
| Heating Power | 17KGS LPG/20KGS FUEL OIL/230KWH/PER TON OF WASTE OIL | |||||||
| Power Consumption | 25KWH PER TONS OF WASTE OIL | |||||||
| Working Pressure | Atoms pressure | |||||||
| Heating Method | Fuel Oil/Natural Gas/LPG/Electricity | |||||||
| Heating Temp. | 30-420℃ | |||||||
| Voltage | 220/380/415V 50/60HZ | |||||||
| Noise | ≤60dB | |||||||
Performances of recycled diesel from To Diesel Lube Oil Recycling Plant
Waste oil after fractional distillation, about 85% to 90% of premium diesel products are produced, and the output varies also according to the impurity content of waste oil. The diesel produced is low sulfur diesel with good performance and high purity, which can be used in engines, internal combustion engines and other agricultural machinery etc..
Parameters Of Diesel Product From To Diesel Lube Oil Recycling Plant
| PARAMETER | UNIT | METHOD | RESULT | ||||
| Flash Point PMCC | °C | ASTM D93-18a | 61 °C | ||||
| Water Content | ppm | ASTM D 6304-07 | 81 | ||||
| Lubricity, corrected diameter (ws 1.4) at 60°C § | µm | ASTM D6079-18 | 485 | ||||
| Ash Content | % wt | ASTM D 482-13 | <0.001 | ||||
| Sulphur Content | %wt | ASTM D4294-16e1 | 0.0046 | ||||
| Density at 15°C | kg/m3 | ASTM D1298-12b | 835.5 | ||||
| Pour Point | °C | ASTM D97-12 | -21 | ||||
| Cetane Index | ASTM D 4737-10 | 55.8 | |||||
| Viscosity Kin at 40°C | cSt | ASTM D445-17a | 3.8 |
High Lights Of To Diesel Lube Oil Recycling Plant
• ECO Friendly: full set of tail gas processing line with scrubber and ultraviolet deodor system.
• Genuine continuous distillation: Equipped with unique fractionator for continuous process.
• Optional heating method to prevent fouling and higher heat efficiency.
• First-calss raw materials with ASME relations standard
• Thickness and material selection are after calculation by profession engineering software.
• Cooling and heat exchange area are after precising calculation by Apsen and ProII.
• Special waste oil from customer are doing pre-test and all properties are tested to give report in PurePath's professional laboratory.
Factory Show
Customer Visiting
Successful Project Show
FAQ
Are there any bad smell or odor from PPGT-LP To Diesel Lube Oil Recycling Plant while distillation system is working?
There will be no smell at all as the gas produced by PPGT-LP To Diesel Lube Oil Recycling Plant will be purified by our exclusive tail gas purification unit before emission.
What is the yield of this distillation system?
Typically the yield of our distillation system is between 85-93.1% (depending on variations of water content, light HC and others ingredients from waste oil.)
Please do not hesitate to contact us. 0086 15213363289(Whatsapp&Wechat available)
