Environmental Friendly Used Engine Oil To Diesel Lube Oil Recycling Plant
We are proud to present you with our PPGT-LP Power Saving Waste Oil Distillation Plant which is combined with dozens of our newest technologies to delivery you with the excellent quality of diesel oil out of different type of car engine and machinery engine or industrial waste oil, tire and plastic pyrolysis oil and sludge oils.
As the manufacturer, PurePath owns professional engineering team to provide constructively project proposal according to different waste oil feedstock or standard requirement of the final oil products. In order to get a more clear and purier distillates, genuine continuous fractional distillation and further PurePath exclusive desulfurization system are optional. Before the process of distillation begins, we also highlight the equally important steps prior to cracking distillation. A concurrent pretreatment solid removal and dehydration and defueling process could also upgrade the quality and purity of oil products and increase the working efficiency.
Plant Specification of Lube Oil Recycling Plant
|Process Capacity MAX.||2 TPD||5 TPD||10 TPD||15 TPD||20 TPD||30 TPD||50 TPD||100 TPD|
|Heating Power||17KGS LPG/20KGS FUEL OIL/230KWH/PER TON OF WASTE OIL|
|Power Consumption||25KWH PER TONS OF WASTE OIL|
|Working Pressure||Atoms pressure|
|Heating Method||Fuel Oil/Natural Gas/LPG/Electricity|
Performances of recycled diesel from Lube Oil Recycling Plant
Waste oil after fractional distillation, about 85% to 90% of premium diesel products are produced, and the output varies also according to the impurity content of waste oil. The diesel produced is low sulfur diesel with good performance and high purity, which can be used in engines, internal combustion engines and other agricultural machinery etc..
Parameters Of Diesel Product From Lube Oil Recycling Plant
|Flash Point PMCC||°C||ASTM D93-18a||61 °C|
|Water Content||ppm||ASTM D 6304-07||81|
|Lubricity, corrected diameter (ws 1.4) at 60°C §||µm||ASTM D6079-18||485|
|Ash Content||% wt||ASTM D 482-13||<0.001|
|Sulphur Content||%wt||ASTM D4294-16e1||0.0046|
|Density at 15°C||kg/m3||ASTM D1298-12b||835.5|
|Pour Point||°C||ASTM D97-12||-21|
|Cetane Index||ASTM D 4737-10||55.8|
|Viscosity Kin at 40°C||cSt||ASTM D445-17a||3.8|
High Lights Of Lube Oil Recycling Plant
• ECO Friendly: full set of tail gas processing line with scrubber and ultraviolet deodor system.
• Genuine continuous distillation: Equipped with unique fractionator for continuous process.
• Optional heating method to prevent fouling and higher heat efficiency.
• First-calss raw materials with ASME relations standard
• Thickness and material selection are after calculation by profession engineering software.
• Cooling and heat exchange area are after precising calculation by Apsen and ProII.
• Special waste oil from customer are doing pre-test and all properties are tested to give report in PurePath's professional laboratory.
Successful Project Show
Are there any bad smell or odor from PPGT-LP Used Oil Recycling Machine while distillation system is working?
There will be no smell at all as the gas produced by PPGT-LP Used Oil Recycling Machine will be purified by our exclusive tail gas purification unit before emission.
What is the yield of this distillation system?
Typically the yield of our distillation system is between 85-93.1% (depending on variations of water content, light HC and others ingredients from waste oil.)
Please do not hesitate to contact me.