Decolorization And Deodorization Base Oil Extraction Plants With Siemens PLC Control
Product Description of Deodorization Base Oil Extraction Plants
PPGT-SE water white oil refining system, which is applicable for refining the following oil into good color and properties.
Waste transformer oil
Acid refined oil
Vacuum side flow oil
Hydraulic oil, gear oil, etc.
The refined color is less than 0.5. The viscosity, viscosity index, acid value, residual carbon, demulsification value, pour point and saturated hydrocarbon of refined base oil can reach API II or API II+ equivalent hydrogenated base oil.
Performances of Polished oil from Deodorization Base Oil Extraction Plants
|Item||Unit||Method||Technical data after polishing|
|Appearance||/||Visual Inspection||Bright & Clear||Bright & Clear|
|ASTM Color||/||ASTM D1500||＜0.5||0.5|
|Kinematic viscosity@40℃||mm2/s||ASTM D445-15a||16~32.5||28~98.5|
|Viscosity index||/||ASTM D2270-04||＞120||＞125|
|Flash point(COC)||℃||ASTM D92-05||＞200||＞230|
|Poure point||℃||ASTM D97-11||-12||-9|
|Sulfur content||%wt||ASTM D4294||＜0.010||＜0.010|
|Carbon Residue||%wt||ASTM D189||＜0.01||＜0.01|
|Saturated hydrocarbon||%wt||ASTM D2007||90~95%||90~95%|
Technical Flow Chart of Deodorization Base Oil Extraction Plants
Efficient Centrifugal Extractor of Deodorization Base Oil Extraction Plants
The principle of high-speed centrifugal contactor is: two immiscible solutions with different densities are pumped into the extractor through two inlets respectively, and then quickly mixed in the gap between the cylinder and the shell. The mixed liquid enters the cylinder through the inlet at the bottom of the cylinder, accelerating the heavy phase to be thrown to the side of the drum. The light phase is located inside the heavy phase, the two-phase interface is located between the light phase outlet and the heavy phase underflow channel, and the heavy phase underflow channel is located in the upper part of the separation zone composed of heavy phase enthalpy.
Successful Project Show
1, What‘s the main purpose of PPGT-SE?
It's mainly used to upgrade base oil from vacuum distillation which is without good performance could be improved to water color, increase the viscosity and viscosity index, reduce the acid value and carbon residue; aromatics could be stripped to increase the content of saturated hydrocarbon above 90% to ensure the API group II standard base oil product.
2, How much oil we can get after PPGT-SE solvent extraction plant?
We can get 98%-99% polished oil from PPGT-SE; The oil loss is only 0.5%-1%.
Welcome to contact us for more details (+86 15213363289 WhatsApp / WeChat 24-H service)