Wipe Film And Short Path Evaporator Distillation Used Oil Recycling Plant With Explosion Proof Motor
Product Description of TFE Used Oil Recycling Plant
PurePath PPGT-BP Series Waste Oil Recycling Plant is to recycle used engine oil as the light yellow base oil, the color stand is formed 1-1.5, flash point is more than180℃. It could not only remove the water impurities, but also remove carbon, heavy metal, oxides as well as bad substance as colloid and bitumen, the recycled base oil we get from the machine ranges from SN70~SN500, typical base oil products like SN150, SN250, SN350,SN500 etc.
This equipment adopts vacuum distillation technology, and physicochemical actions to flocculate,passivate, absorb and eliminate impurities and harmful contamination. A new chemical alkaline complex catalyst is used to assist the physicochemical action, it also helps to remove some organic acid and upgrade the base oil quality.
PPGT-BP waste engine oil distillation machine is used to define different kinds of waste engine oil, transfomer oil, industrial lube oil, etc. to clean base oil. PurePath has about 10 years of rich experience for designing and installing the machine. During the past ten years, we have been constantly updating and adjusting our equipment. Up to now, our equipment has been very stable, with mature after-sales service, provide free installation and commissioning.
Technical Process Description of TFE Used Oil Recycling Plant
Plant Specification of TFE Used Oil Recycling Plant
|Process Capacity MAX.||2 TPD||5 TPD||10 TPD||15 TPD||20 TPD||30 TPD||50 TPD||100 TPD|
|Heating Power||17KGS LPG/20KGS FUEL OIL/230KWH/PER TON OF WASTE OIL|
|Power Consumption||25KWH PER TONS OF WASTE OIL|
|Heating Method||Fuel Oil/Natural Gas/LPG/Electricity|
Performances of Base Oil Product from TFE Used Oil Recycling Plant
|Color scale||ASTM D1500||≤1||≤1.5|
|Water Content||ASTM D1744||Trace (% wt)||Trace (% wt)|
|Kinematic Viscosity at 40℃||ASTM D445-15a||32.170 mm2/s||67.420 mm2/s|
|Viscosity Index||ASTM D2270-10||117||122|
|Total Sulfur Content||ASTM D4294-16e1||0.0071 %(m/m)||0.0093 %(m/m)|
|Density at 15 ℃||ASTM D4052-18||0.898 kg/m3||0.917 kg/m3|
|Pour Point||ASTM D97-17b||-18 ℃||-21 ℃|
|Copper Strip Corrosion
|ASTM D130-18||1a Rating||1a Rating|
|Total Acid Number||ASTM D974||0.01(mg KOH/g)||0.01(mg KOH/g)|
|Carbon Residue Conradson||ASTM D189||0.01(% wt)||0.01(% wt)|
|Smell||Organoleptic||No Smell||No Smell|
Successful Project Show
Are there any bad smell or odor from PPGT-BP waste oil re-refining plant while distillation system is working?
There will be no smell at all as the gas produced by PPGT-BP waste oil re-refining plant will be purified by our exclusive tail gas purification unit before emission.
What is the yield of this distillation system?
Typically the yield of our distillation system is between 80-90% (depending on variations of water content, light HC and others ingredients from waste oil.)
What is the operation cost of this distillation system? How long can I take back my investment?
Please consult one of our sales representative for more information about operation cost and turnover of capacity you are interested. We will be providing you the professional budgets breakdown for your particular project.
Please do not hesitate to contact us.