Over 90% High Oil Yield PLC Control Waste Oil Distillation Machine For Oil Refinery Station
Product Description of PLC Control Waste Oil Distillation Machine
PPGT-LP series is applicable to produce quality diesel by cracking oil such as waste engine oil, motor oil, heavy fuel, marine oil, sludge and various lubricating oils. After our machines recycle, the waste oil can be turned into clean diesel. It can be directly used in ships, trucks, generators, etc.
Technical Working Process of PLC Control Waste Oil Distillation Machine
The working process from waste oil to standard clean diesel distillation refining machine is to pump the waste oil into the distillation kettle or continuous furnace after pretreatment for water and LGO stripping, and start heating for cracking or fractional distillation. When the temperature reaches 100 ℃ - 170 ℃, the water and LGO components can be distilled. When the temperature reaches 230 ℃ - 420 ℃, the light and heavy components are converted from steam to diesel oil after efficient catalytic cracking. Finally, the collected diesel liquid is filtered or re-refined to high-quality finished diesel.
Plant Specification of PLC Control Waste Oil Distillation Machine
| Model No. | PPGT-LP-1 | PPGT-LP-2 | PPGT-LP-3 | PPGT-LP-4 | PPGT-LP-5 | PPGT-LP-6 | PPGT-LP-7 | PPGT-LP-8 |
| Items. | ||||||||
| Process Capacity MAX. | 2 TPD | 5 TPD | 10 TPD | 15 TPD | 20 TPD | 30 TPD | 50 TPD | 100 TPD |
| Heating Power | 17KGS LPG/20KGS FUEL OIL/230KWH/PER TON OF WASTE OIL | |||||||
| Power Consumption | 25KWH PER TONS OF WASTE OIL | |||||||
| Working Pressure | Atoms pressure | |||||||
| Heating Method | Fuel Oil/Natural Gas/LPG/Electricity | |||||||
| Heating Temp. | 30-420℃ | |||||||
| Voltage | 220/380/415V 50/60HZ | |||||||
| Noise | ≤60dB | |||||||
Performances of PLC Control Waste Oil Distillation Machine
Waste oil after fractional distillation, about 85% to 90% of premium diesel products are produced, and the output varies also according to the impurity content of waste oil. The diesel produced is low sulfur diesel with good performance and high purity, which can be used in engines, internal combustion engines and other agricultural machinery etc..
Parameters Of Diesel Product From PLC Control Waste Oil Distillation Machine
| PARAMETER | UNIT | METHOD | RESULT | ||||
| Flash Point PMCC | °C | ASTM D93-18a | 61 °C | ||||
| Water Content | ppm | ASTM D 6304-07 | 81 | ||||
| Lubricity, corrected diameter (ws 1.4) at 60°C § | µm | ASTM D6079-18 | 485 | ||||
| Ash Content | % wt | ASTM D 482-13 | <0.001 | ||||
| Sulphur Content | %wt | ASTM D4294-16e1 | 0.0046 | ||||
| Density at 15°C | kg/m3 | ASTM D1298-12b | 835.5 | ||||
| Pour Point | °C | ASTM D97-12 | -21 | ||||
| Cetane Index | ASTM D 4737-10 | 55.8 | |||||
| Viscosity Kin at 40°C | cSt | ASTM D445-17a | 3.8 |
Product Features of PLC Control Waste Oil Distillation Machine
1) High recovery rate
The highest recovery rate was 90-95%. Gasoline 5-7%, diesel 85-90%.
2) Easy to operate
PPGT-LP oil recycling machines are easy to operate with Siemens PLC automatic control to low operation cost. They can be operated by only 1-2 workers.
3) Multiple black oil feed
PPGT-LP oil recycling machines can recycle all kinds of waste black diesel, waste engine oil, waste motor oil, waste mineral oil and almost all used industrial oils into diesel. Cracked oil can be used as industrial or civil fuel, and even drive engine fuel.
4) High efficiency cracking catalyst
PurePath specially formulated cracking and desulfurization catalyst is with high efficient. It has a good effect on pour point reduction and desulfurization for final diesel product.
Company Profile
Chongqing PurePath Green Technology Co., Ltd. (the PurePath) was founded in 2007 and headquartered in Jiulongpo, Chongqing, China. The PurePath owns its unique engineers team to provide designs and manufactures complete, turnkey, skid mounted systems which recover near virgin grade base oil and diesel from waste lubricants. PurePath has been testing, engineering, designing, fabricating, installing and operating waste oil re-refining and distillation systems since its inception. Our mission is to facilitate environmental restoration, resource recovery and pollution reduction through innovative technologies and design, construction, and operation of affordable state-of-the-art waste recovery systems.
The PurePath currently focused on the waste oil recycling solutions. On the whole, the company's product ranges includes the following:
OEM and ODM services are available.
Factory Show
Customer Visiting
Successful Project Show
FAQ
What are the byproducts out from PPGT-LP Fractional Distillation Waste Oil Distillation Plant, how do I dispose it?
The byproduct are usually comprised of gas, water, oil sludge/residue and catalysts.
The gas will be purified before emission or to be recycled as heating fuel;
The water will be filtrated and purified as cooling water;
The oil sludge could be used for burning or to be raw material for producing asphalt or road constructions.
The catalysts can be reactivated by microwave or other technologies for reuse. Or to be handed over to the professional recycler for disposal.
What are the consumables of this distillation system? Are those additives required?
There are 2 consumables which will be needed for PPGT-LP Fractional Distillation Waste Oil Distillation Plant, one is our formulated catalyst, another one is refining adsorbent.
As a matter of fact, those consumables required for PPGT-LP process are carefully selected and proved to be essential to the distillation/pyrolysis process even for those famous refineries from all over the world.
Please consult our sales for more information about the catalysts and what role it plays during the whole distillation process.
